The product is called PP, EPE hot melt adhesive, suitable for the adhesion of hard sticky materials such as PP and EPE. Softening point at about 80 ℃, anti-temperature about 70 ℃, the opening time in 15-20 s.Our products are non-toxic and insipid. High viscosity, fast curing, easy operation, continuous use without carbonization and yellowing resistance, comply with rosh instructions.
Instructions:
- Recommended gluing method: dispensing
- Recommended temperature: 130 ℃ to 150 ℃
- If there is Carbon deposition in a rubber case or hose, may consult equipment manufacturer, or clean with clean mineral oil under 120 ℃.
- The stickiness of the adhesive can be adjusted by temperature.
- It is prohibited to mix with other brand hot melt adhesive.
- After adding material to the hot melt tank, the glue tank cover should be closed immediately to prevent foreign contamination.
